Family line
ETA 2804-2
This profile traverses clone_of · derived_from · ebauche_of · revision_of · variant_of and keeps disputed edges. Every edge in this view carries at least one reference.
Generations run left to right, ancestors first, and the axis along the top is ordinal rather than linear: each band is one generation, labelled with the range of sourced introduction years it contains. A band reads “—” when no caliber in it has a year anyone published — the gap is the finding, not a rendering failure. Dotted arcs above and below the drawing are related edges — successor, drop-in, no-derivation — which are stored in a different table from lineage and can never form part of an ancestry path.
Every edge in this view
| Caliber | Relationship | To | Status | Detail | Sources |
|---|---|---|---|---|---|
| ETA 2804-2 | derived from lineage | ETA 2824-2 | disputed | — | |
| ETA 2804-2 | variant of lineage | ETA 2824-2 | disputed | component delta: automatic_module | |
| ETA 2824-2 | revision of lineage | ETA 2824 | accepted | interchange note: different spares: mainspring 1.20x11.0x0.115 mm -> 1.25x11.0x0.125 mm; stem W3408 -> W3738 · component delta: mainspring,keyless_works | |
| ETA 2824-2 | derived from lineage | Eterna 1427 | accepted | — | |
| ETA 2826-2 | derived from lineage | ETA 2824-2 | accepted | — | |
| ETA 2836-2 | variant of lineage | ETA 2824-2 | accepted | component delta: calendar_mechanism | |
| ETA C07.111 | derived from lineage | ETA 2824-2 | accepted | interchange note: power reserve extended from ~38 h to 80 h — same architecture, reworked barrel/gearing/regulation. DE-1 fires. · component delta: barrel,gear_train | |
| ETA C07.141 | variant of lineage | ETA C07.111 | accepted | component delta: calendar_mechanism | |
| ETA C07.611 | variant of lineage | ETA C07.111 | accepted | interchange note: metal/ruby escapement and 25 jewels versus the C07.1xx synthetic escapement and 23 jewels · component delta: escapement_architecture | |
| ETA C07.811 | variant of lineage | ETA C07.111 | accepted | interchange note: silicon hairspring, antimagnetic. Recorded as a note rather than a component_delta — see calibers/README.md 'Deviations from spec'. | |
| Ginault 7275 | clone of lineage | ETA 2824-2 | accepted | true clone | |
| Hangzhou 6300 / 6301 | clone of lineage | ETA 2824-2 | accepted | true clone | |
| Hangzhou 6311 | clone of lineage | ETA 2836-2 | accepted | true clone | |
| PT5000 | clone of lineage | ETA 2824-2 | disputed | true clone | |
| ISA S280 | clone of lineage | ETA 2824-2 | accepted | true clone | |
| Landeron L24 | clone of lineage | ETA 2824-2 | accepted | true clone · interchange note: Seagull ébauches with Swiss finishing | |
| Liaoning Peacock SL-3000 | clone of lineage | ETA 2824-2 | accepted | true clone | |
| Sea-Gull ST21 | clone of lineage | ETA 2824-2 | accepted | true clone | |
| Sea-Gull ST2130 / TY2130 | clone of lineage | ETA 2824-2 | accepted | true clone | |
| Sellita SW200-1 | clone of lineage | ETA 2824-2 | accepted | true clone · interchange note: practitioner estimate ~90% parts overlap; SW200 steady pins on the plate vs ETA on the bridge; the SW200-1 balance bridge is a little different and is likely not swappable with a 2824-2 balance bridge | |
| Sellita SW200-1 | revision of lineage | Sellita SW200 | accepted | interchange note: three components changed (balance bridge, escape wheel, ratchet wheel); all other parts of the SW200 are interchangeable with the SW200-1. Caliber Corner notes the ratchet-teeth issue is still experienced in the SW200-1. · component delta: balance_wheel,escape_wheel_treatment | |
| Sellita SW200-2 Power+ | revision of lineage | Sellita SW200-1 | accepted | — | |
| Sellita SW200 | clone of lineage | ETA 2824-2 | accepted | true clone | |
| Soprod P024 | clone of lineage | ETA 2824-2 | accepted | true clone | |
| STP1-11 | clone of lineage | ETA 2824-2 | accepted | true clone | |
| Valanvron VAL-24 | clone of lineage | ETA 2824-2 | accepted | true clone | |
| Eterna 12824 (ETA 2824) | ébauche of lineage | ETA 2824 | staged | — | |
| Eterna 12825 (ETA 2824) | ébauche of lineage | ETA 2824 | staged | — | |
| Longines 633.1 (ETA 2824) | ébauche of lineage | ETA 2824 | staged | — | |
| ETA 2804-2 | no derivation between related | ETA 2824-2 | disputed | — | |
| PT5000 | drop-in for related | ETA 2824-2 | disputed | hand sizes 1.50/0.90/0.25 mm stated identical to the ETA 2824-2 | |
| design:kenissi-mt5602 | successor of related | ETA 2824-2 | accepted | THE ÉBAUCHE-TO-MANUFACTURE SWITCH, encoded as what it is: a commercial succession inside one brand's product, NOT a derivation. Tudor replaced the bought ETA 2824 in the Black Bay with the Kenissi-built MT5602, keeping the same 28,800 vph and nearly doubling the reserve (38 h -> 70 h). The row lives in the related table, so browsing the MT5602's ancestry will never walk into ETA. | |
| design:ronda-r150 | different from related | ETA 2824-2 | accepted | Ronda's own positioning: not a copy, but the same casing dimensions. This is a RELATED edge and can never enter an ancestry path. | |
| design:stp-stp1-21 | successor of related | STP1-11 | accepted | succession within the clone line itself; no parts continuity is asserted by the source |
Curated overlays
A curated family label is an attributed opinion about grouping, not a node in the graph. No edge can point at one, and membership never affects ancestry.
Sources
- 1Internet Archivehttps://web.archive.org/web/2023/https://watchbase.com/eta/caliber/2824-2archivetier 3retrieved 2026-08-244 facts on this page
- 2Caliber Cornerhttps://calibercorner.com/eta-caliber-2824-2/curated dbtier 2retrieved 2026-08-242 facts on this pagecited, never crawled
- 3Internet Archivehttps://web.archive.org/web/2021/http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&&2uswk&ETA_2824archivetier 2retrieved 2026-08-242 facts on this page
- 4Internet Archivehttps://web.archive.org/web/2021/http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&&2uswk&ETA_2824_2archivetier 2retrieved 2026-08-243 facts on this page
- 5Caliber Cornerhttps://calibercorner.com/eta-caliber-2836-2/curated dbtier 2retrieved 2026-08-241 fact on this pagecited, never crawled
- 6Monochrome Watcheshttps://monochrome-watches.com/swatch-groups-powermatic-movement-a-powerful-entry-level-engine/presstier 2retrieved 2026-08-241 fact on this page
- 7professionalwatches.comhttps://professionalwatches.com/tissot-caliber-c07-111/presstier 2retrieved 2026-08-241 fact on this page
- 8chrono24.comhttps://www.chrono24.com/magazine/eta-movements-from-the-2824-2-to-the-powermatic-80-p_80840/presstier 2retrieved 2026-08-241 fact on this page
- 9Caliber Cornerhttps://calibercorner.com/tissot-caliber-powermatic-80/curated dbtier 2retrieved 2026-08-243 facts on this pagecited, never crawled
- 10watchuseek.comhttps://www.watchuseek.com/threads/powermatic-80.5500630/page-2forumtier 4retrieved 2026-08-242 facts on this page
- 11Caliber Cornerhttps://calibercorner.com/eta-2824-clones/curated dbtier 2retrieved 2026-08-2410 facts on this pagecited, never crawled
- 12chinesewatchwiki.nethttps://chinesewatchwiki.net/Clone_movementswikitier 3retrieved 2026-08-243 facts on this page
- 13Caliber Cornerhttps://calibercorner.com/hk-precision-technology-caliber-pt5000/curated dbtier 2retrieved 2026-08-242 facts on this pagecited, never crawled
- 14Watchguy (service logs)https://watchguy.co.uk/comparison-sea-gull-st2130-eta-2824-2-peacock-sl3000/first handtier 2retrieved 2026-08-241 fact on this page
- 15chinesewatchwiki.nethttps://chinesewatchwiki.net/Tianjin_Seagullwikitier 3retrieved 2026-08-242 facts on this page
- 1617jewelshttps://17jewels.info/movements/s/sea-gull/sea-gull-st2130/curated dbtier 3retrieved 2026-08-241 fact on this page
- 17Caliber Cornerhttps://calibercorner.com/sellita-caliber-sw200-1/curated dbtier 2retrieved 2026-08-242 facts on this pagecited, never crawled
- 18watchrepairtalk.comhttps://www.watchrepairtalk.com/topic/10405-sellitta-sw200-1-eta-2824-2-parts-interchangeability/forumtier 4retrieved 2026-08-241 fact on this page
- 19
- 20Monochrome Watcheshttps://monochrome-watches.com/a-technical-perspective-industry-news-sellita-sw200-2-power-automatic-movement-upgrade-specs/presstier 2retrieved 2026-08-241 fact on this page
- 21Monochrome Watcheshttps://monochrome-watches.com/inside-sellita-the-giant-supplier-of-mechanical-movements-behind-the-scenes-watch-industry/presstier 2retrieved 2026-08-241 fact on this page
- 22
- 23Caliber Cornerhttps://calibercorner.com/stp-caliber-stp1-11/curated dbtier 2retrieved 2026-08-242 facts on this pagecited, never crawled
- 24Internet Archivehttps://web.archive.org/web/20191021052603/http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&a0&2uswk&Eterna_12824archivetier 2retrieved 2019-10-211 fact on this page
- 25Internet Archivehttps://web.archive.org/web/20191021031111/http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&a0&2uswk&Eterna_12825archivetier 2retrieved 2019-10-211 fact on this page
- 26Internet Archivehttps://web.archive.org/web/20171031000436/http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&143&2uswk&Longines_633_1archivetier 2retrieved 2017-10-311 fact on this page
- 27Monochrome Watcheshttps://monochrome-watches.com/history-tudor-black-bay-collection-2012-2024-including-all-models-all-movement-bb58-bb54-gmt-in-depth-recap/presstier 2retrieved 2026-08-241 fact on this page
- 28Caliber Cornerhttps://calibercorner.com/ronda-caliber-r150/curated dbtier 2retrieved 2026-08-241 fact on this pagecited, never crawled